Specification

• Maximum lifting capacity each boom : 7.5 tons
• Maximum reach at sides : 3480 mm
• Maximum reach at near most : 450 mm
• Clear lift of sides at minimum reach. : 2.5 tons
• Overall width of Wrecker. : 2500 mm
• Height above truck frame. : 1800 mm
• Boom heal to centre line of boom sheave yoke. : 4145 mm
• Boom swing vertically. : 75^o
• Boom swing horizontally. : 180^o
• Wire rope dia. : 14mm
• Breaking strength of wire rope. : 13 Tons
• Base drum pulling capacity single line each winch. : 7.5 Tons
• Load line drum capacity. : 100 Mtrs.
• Boom End Cable. : 15 Mtrs.
• Wrecker weight with standard equipment. : 2.8 Tons approx.
• Speed of the Winch at 800 RPM of PTO per minute. : 1.5 Mtrs./P.M. Approx.

Optional Tools And Accessories

• Tow chain : (2nos.)
• Flag post : (2 nos.)
• Searchlight : (1 nos.)
• Boom light : (2 nos.)
• Wooden block : (8 nos.)
• A set of snatch block : (2 nos.)
• Tow bar : (2 nos.)
• Tool box : (1 no.)
• Crank Handle : (1no.)
• First aid box : (1no.)
• Towing Hitch Assembly : (1no.)
• Driver & Crew Cabin : (1 no.)

Special Features

• To dig out itself when bogged down in mud throughout self recovery mechanism specifically provided.
• Vehicle engine speed can be controlled from the rear side of the Vehicle during recovery. Pulling and load lifting operations.
• Has a capacity to lift and move with casualty vehicle of16tonsGVW.
• The crew cabin is easily accessible from sides of the Vehicle. It provides protection to the crew against rain and heat of the sun with storage arrangement.
• A torque limiter slipping clutch is a protective device which limits the toque transmitted in drive system and prevents damage to the wrecker.

Chassis Requirements

• Any chassis of minimum pay load of 12 tons e.g. TATA 1613, AL1613, Eicher 20.16