Home » Our Products » 15 Ton Mechanical Wreckers

15 Ton Mechanical Wreckers


MODEL BWGN-7B:15 TONS CAPACITY

The 15 Tons capacity heavy duty recovery equipment is the largest & heaviest recovery wrecker & has been designed for recovery operations in steep ghats, plains, deserts & high altitude areas. It efficiently rightens the overturned vehicles, lifts and shifts the disabled vehicles for repairs.
Specification
Maximum pulling capacity 15 Tons
Maximum reach at rear most. 450mm
Overall width of Wrecker. 2500mm
Boom heal to centre line of boom sheave yoke 3760mm
Boom swing vertically. 75°
Boom swing horizontally. 180°
Breaking Strength of wire rope. 24.5 Tons
Load line drum capacity. 40 Mtrs.
Wrecker weight with standard equipment. 5.5 Tons
Maximum reach at sides. 3480 mm
Clear lift on sides at minimum reach. 3 Tons
Height above truck frame. 1700 mm
Boom End Cable. 15Mtrs
Speed of the Winch at 800 RPM of PTO per minute. 1.5 Mtrs./P.M. Approx.

Optional Tools And Accessories
Tow chain (2 nos.)
Flag post (2 nos.)
Searchlight (1 no.)
Boom light (2 no.)
Wooden block (8 nos.)
A set of snatch block (1 no.)
Tow bar (2 nos.)
Tool box (1 nos.)
Crank Handle (2 no.)
First aid box (1 no.)
Towing Hitch Assembly (1 no.)
Driver & Crew Cabin (1 no.)

Special Features
  • Sturdy platform built for maximum stability & efficiency.
  • Twin boom fabricated in high strength steel and further reinforced with double 40 mm X 40 mm MS Angles and 3 nos. Truss plates.
  • Two retractable & fully swivelling sturdy outboard legs.
  • Tubes 127 X 108 mm are provided on the frame of the wrecker platform to impart additional stability and strength.
  • A torque limiter slipping clutch is a protective device which limits the toque transmitted in drive system and prevents damage to the wrecker.
  • Has a capacity to lift and move with casualty vehicle of 22 tons GVW.

Chassis Requirements
  • Any chassis of minimum pay load of 22 tons (Rearppoule Galaxy) e.g. TATA 2516, AL 2516, Eicher Galaxy 33.25
  • To dig out itself when bogged down in mud throughout self recovery mechanism specifically provided.
  • Vehicle engine speed can be controlled from the rear side of the Vehicle during recovery. Pulling and load lifting operations.
  • Has a capacity to lift and move with casualty vehicle of16tonsGVW.
  • The crew cabin is easily accessible from sides of the Vehicle. It provides protection to the crew against rain and heat of the sun with storage arrangement.
  • A torque limiter slipping clutch is a protective device which limits the toque transmitted in drive system and prevents damage to the wrecker.

Chassis Requirements
  • Any chassis of minimum pay load of 12 tons e.g. TATA 1613, AL1613, Eicher 20.16



Our Products
Hydraulic Wreckers Mechanical Wreckers Platform Trucks Troop/Load Carriers
Water Browser Tank Winches Scissor Lift